The top of the nut is shaped to follow the radius of the fretboard, and the string slots also follow this curve. To allow the strings to clear the top of the first fret, the bottoms of the slots should be . 030″ higher than the fret height.
Also question is, how do I know if my guitar nut is too high?
To check nut-slot height, hold the string down at the third fret, and see how much it moves over the first fret. This is similar to checking neck relief, but the string should move much less. If the string doesn’t move at all, chances are the slot is too low.
Correspondingly, how do you adjust a nut slot on a guitar?
Regarding this, how do you adjust the action on a nut?
How do you adjust the depth of a nut slot?
How do you fix high action on an acoustic guitar?
To lower the action on an acoustic guitar you don’t have to adjust the bridge in any way, you only have to adjust the saddle.
- The saddle serves the same purpose as the nut, controlling the height of the guitar strings. …
- The strings are strung through the bridge, and their tension holds the saddle in place.
How do you lower the nut action on an acoustic guitar?
How do you raise the nut on an acoustic guitar?
How far should strings sit in a nut?
Nut Slots: Depth
Big deep slots and a quarter-inch of nut above the strings just looks a bit rubbish. Ideally, your wound strings should have about half to two-thirds of their diameter in their slots and the unwound strings should sit just below the surface.
How much should I lower the action on my acoustic guitar?
An action reduction of 1mm is often all that is needed to make a guitar go from bad to good playability. You can also adjust your action in steps if you aren’t sure how low to go or how low of action your guitar can handle without getting fret buzz.