Are combo amps good for recording?

one or two 10″ or 12″ speakers is generally most suitable in small venues. While 4×10″ or 4×12″ work better for larger venues, and often come in their own dedicated cabinets. For recording, pretty much any combination can be used, depending on the tone you are searching for.

>> Click to read more <<

Likewise, people ask, can you record guitar straight into audio interface?

A standard audio interface can be used to record your guitar. Many of these have an input designed to take either a microphone or a direct input from an instrument. There are specific audio interfaces designed for guitar (more on this below) but most audio interfaces will be able to help you record to a good standard.

Beside this, did Kurt Cobain know any music theory? Kurt didn’t know anything about music theory

Although it’s not a gear myth, necessarily, we want to address the myth that Kurt Cobain rebelled against or “shunned” music theory. Again, we turned to Earnie Bailey for answers.

In this regard, do heads sound better than combos?

Head and cab rigs also tend to pump out more volume. This isn’t always the case, but heads tend to have a better power capacity (wattage) and larger cabs naturally make more noise.

Do I need an amp for recording?

2. Do you need a specific amp in order to get the tone you want? If the answer to this question is yes, then you’ll need that amplifier to record.

How do I make my guitar sound professional?

7 Tricks to Get a Better Electric Guitar Sound on Your Recordings

  1. Use a “prepared guitar” …
  2. Use an acoustic as a phantom guitar. …
  3. Record your electric unplugged. …
  4. Use a low-frequency mic on your guitar cabinet. …
  5. Use a bass cabinet. …
  6. Double your tracks with different guitars. …
  7. Use an octave pedal.

How do you record low volume guitar?

How loud should guitar amp be for recording?

I would avoid amps over 28 watts for home recording. From my experience, that’s the tipping point. Loud enough to get a clean sound if you want it and to not choke the amp. You’d be surprised how much this affects the tone of the amp.

How many dB is a guitar amp?

around 115 dB

Is it better to record guitar with amp?

The bottom line: Recording electric guitar direct can be great for your creative flow and sound excellent with the right amp simulations, but sometimes nothing can beat the sound and energy of a real amp and microphone.

What amp did Hendrix use?

He was known to use Fender Twin Reverb and Bassman amps and he had at one point a contract with Sunn. If money is no barrier and you want the real deal – check out the Marshall 1959SLP100 Plexi here.

What amps did Kurt Cobain use?

Apparently Cobain’s preferred amp was a 1960s Fender Twin Reverb, which he used to record In Utero, as well as MTV Unplugged. He also used a similar amp during the recording of Bleach, though it is unknown if it was the exact same one. He also favoured a Mesa/Boogie Studio .

What dB should I record guitars at?

What is this? Recording guitar at around -14 dB is a good starting point. The most important point to keep in mind is to avoid clipping. Recording guitar at around -14 dB should avoid clipping, but you may need to raise or lower your level depending on your style of playing.

What Stratocaster did Kurt Cobain use?

Cobain was no stranger to using this style of guitar, but this was his first time using a sunburst Stratocaster. He played two other guitars that night, a black Stratocaster and a 1965 Jaguar, but the sunburst received the most play during the memorable performance.

Where should a studio amp be placed?

How to Mic Guitar Amps and Cabs in the Studio

  1. Tip #1: Place a dynamic mic pointed at the center of the amp’s speaker cone, up against the grille cloth. …
  2. Tip #2: Point the mic at or near the center of the speaker cone, a short distance away.

Where should I place my guitar amp for recording?

Typically, a guitar amp is close mic’ed to capture the most direct sound. Placing the microphone roughly 4 inches from the grill and aiming it directly at the center of the speaker will produce the most “edge”. If you move the mic further away, it takes away some of the edge and mellows the sound more.

Leave a Comment