The Cordoba C10 and C12 are both at 2.04″ nut width, which is the widest we’ve ever seen. However, it’s likely there are other six-string classical guitars out there with a a similar measurement, perhaps even slightly wider.
Keeping this in view, are all acoustic guitar necks the same width?
Acoustic guitars typically have a nut width between 41mm (1.61”) on the small side and 51mm (2″) on the wide side. The most common widths for steel-string acoustic guitars are typically somewhere in the middle. Standard neck width is usually either 43mm (1 11/16″) or 44mm (1.73”, more often referred to as 1 ¾”).
Hereof, are all acoustic guitar nuts the same size? On acoustic guitars, there’s a spectrum of nut widths. They typically go between 1 11/16” to 1 3/4”, but some go to 1 7/8” and 1 23/32”. Even though the differences between these nut widths are incredibly small, your hands can still feel it.
Furthermore, are wide neck guitars easier to play?
Guitars with wider necks are generally harder to play. Especially if you have really short fingers. On the other hand, too narrow necks can also make some guitar players struggle. The bottom line is that neck width plays a big role in an overall playability of a guitar.
Can your fingers be too big to play guitar?
Eventually you will will develop a muscle memory in your hand, and your fingers will go right to the correct place without thinking about it. So your fingers are not too fat to play guitar. You can do it, just keep practicing.
Does guitar nut size matter?
Do different genres matter? It’s commonly thought that nut width is important with regard to your approach to the guitar e.g. do you play mostly with a pick or play fingerstyle. But for the most part nut width is less important than string spacing as nut width mostly affects the fretting hand and not the picking hand.
How do you measure a nut on a acoustic guitar?
How do you measure string spacing on an acoustic guitar?
To get a rough measurement, take a ruler that measures in millimeters, and measure it between the center of each outer pole (where the low and high E strings pass over). If you want to do it properly, get a proper string spacing rule from Stewmac which locates the correct string positions far more accurately.
How tight should a guitar nut be?
A Good Tight Nut Fit
Apart from the aesthetics and feel, a nut must make good, solid contact with the neck and fingerboard if it’s to work well. You don’t want the nut to impede a string’s vibration and a less-than-solid contact between nut and neck is a recipe for sucking out string energy.
How wide is an acoustic guitar?
Body length: 20″ Body width: 15″ Body depth: 4.5″
Is a wider nut width easier to play?
Are Nut Width And String Spacing The Same Thing? Acoustic guitars with 1 3/4 nut width are often easier to play for players with larger hands. That’s because a wider nut width usually means wider string spacing. However, guitar necks frequently taper as they get closer to the headstock.
What guitar neck is best for small hands?
What is a wide nut guitar?
Generally speaking, a wide nut guitar is defined as any guitar that has a diameter at the nut (the piece at the end of the finger board that controls guitar string spacing) around 1 7/8” or 47.6 mm.
What is fretboard radius?
The fingerboard radius is the measure of the arc of the fingerboard across its width. You don’t have to look too closely at most electric guitar and bass fingerboards to see that few if any of them are truly flat; most of them have a slight convex curvature across their width.
What is the best nut width for guitar?
What is the most common nut width for guitars?
- 43 millimeters or 1 11/16 inches. The most common nut width is best known thanks to the electric guitar and especially the world-famous Stratocaster from Fender. …
- 49 millimeters or 1 15/16 inches.