Short frets like the 6230, 6150, and 6130 are good for people who really like to feel to fingerboard when they play chords. What is this? Whereas, jumbo or medium-jumbo frets feel smoother, provide extra sustain, and can let you bend without exerting as much force.
Secondly, do stainless steel frets affect tone?
Stainless steel frets have nearly no impact on tone and are tough as nails. Every instrument should come with them standard these days. SS frets play like butter — super smooth and glassy feeling.
In respect to this, does fret wire size matter? Which size you like is purely a matter of preference, although it can affect your playing style. If you like your fingers to actually touch the fingerboard when fretting the strings, frets that aren’t very tall like the 6130, 6150 or 6230 are for you.
Also know, how do I know what size frets I need for my guitar?
The Length of a fret is determined by it’s position on the fretboard. Since most/all necks get wider as you work your way up the frets, the 1st fret is considerably shorter than the 20th fret. For example a typical Tele will have 1.650″ nut width while the Butt Width (the width of the neck after the last fret) is 2.2″.
How long do Les Paul frets last?
It depends on the fret material, frequency of your playing and the style of your playing. Taking all these factors in account, guitar frets life can range from a few years to even 20-30 years.
What are XJ frets?
“XJ” frets are extra jumbo…a little taller and a little wider than jumbo frets. As most ESP’s are made for metal/hard rock, they all have XJ frets.
What size frets did SRV use?
The guitar featured frets that measured 0.110″ wide by 0.055″ when new, similar to Dunlop 6100 fretwire. String height was measured to be 5/64″ on the high E string and 7/64″ on the low E string. Each string had three full winds for the best angle at the bone nut.
What size is medium fret wire?
Medium Frets (usually between . 080″ and . 095″)—This medium-sized wire is the sweet spot, in my opinion, giving a comfortable feel and enough mass for nice sustain and even some decent string bending at the larger end of this medium fret width category.
Why are 6105 frets so popular?
The 6105 is a tall fret (almost as tall as the 6000 size) but quite a bit narrower in width. These are great for getting the added pluses of string bendability and a thicker, meatier sound too. Guitarists that do a lot of bending, such as blues and fusion players, should definitely check out these bigger options.
Why are tall frets so narrow?
Ease of bending is also enhanced by taller frets, whether wide or narrow. Narrow frets shouldn’t be too hard to bend on, unless they are badly worn down, and they also leave a little more finger room on the fretboard – particularly in the higher positions – which might suit some players better.