Standard neck width is usually either 43mm (1 11/16″) or 44mm (1.73”, more often referred to as 1 ¾”). What is this? Nylon-string classical guitar necks are typically much wider at anywhere between 47mm and 51mm (2″), as are many gypsy jazz guitars (which incidentally are steel strung).
Moreover, are all guitar necks the same size?
Are There Different Size Guitar Necks? The size of a guitar neck can vary widely between different brands and models. There can be a massive difference in scale length, which is the overall length of a guitar neck. The width of a guitar neck and the radius can also vary.
Keeping this in view, how is fingerboard radius measured? How Do You Measure It? As for the radius itself, in mathematics, the ‘radius’ is the distance from the center to the circumference (or edge) of a circle. In this case, the fretboard is placed at the top of the circle and the arc from one edge to the other is the size of the radius.
Regarding this, how is guitar neck length measured?
The best way to determine the scale length of a guitar is to measure the distance between its nut and the centre of its 12th fret. Once you’ve discovered the value, double it. And voila – you’ve established the scale length. Keep in mind that guitar scale lengths are typically measured in inches.
How long is 24 fret neck?
The scale length is the measured from the bridge to the nut and is defined as twice the length between the nut and the twelfth fret. So similar guitars such as a 22 fret Stratocaster and a 24 Supercaster will still have the same 25.5” scale length.
How long is a guitar fingerboard?
Examples
| Model | r | w1 |
|---|---|---|
| Vintage Fender Stratocaster guitar | 7.25″ (184.1 mm) | |
| Modern Fender Stratocaster American guitar | 9.5″ (241 mm) | 1 11/16″ (42.8 mm) |
| Gibson guitars | 12″ (305 mm) | 1.68″ (43.053 mm) |
| Danelectro guitars | 14″ (355 mm) |
How thick is a fretboard?
Most modern Martin fretboards are around 1/4″ in the center. The old Martins are usually no more than 0.225″.
How wide is a Stratocaster fretboard?
What are the dimensions of a fretboard?
Acoustic & Classical Guitar Fingerboard Widths
Neck widths of 43 mm (11116” or 1.67”) and 44 mm (134” 0r 1.73”) are most common. Standard Martin Dreadnought model comes with 43 mm neck width.
What fretboard radius is the best?
9.5 or 10 inch radius offer a good mix of curvature or arch on the top side of the fret board for playing chords and flatness for single note bending that does not buzz out or fret out.
What is standard guitar size?
What is the radius of a fretboard?
The fingerboard radius is the measure of the arc of the fingerboard across its width. You don’t have to look too closely at most electric guitar and bass fingerboards to see that few if any of them are truly flat; most of them have a slight convex curvature across their width.