On acoustic guitars, there’s a spectrum of nut widths. They typically go between 1 11/16” to 1 3/4”, but some go to 1 7/8” and 1 23/32”. Even though the differences between these nut widths are incredibly small, your hands can still feel it.
Accordingly, are wide neck guitars easier to play?
Wide-neck guitars can be easier to play depending on your circumstance and the style you want to play. There are some benefits to a wide-neck guitar if you have larger hands and thicker fingers. Overall, the difference is quite negligible for beginners and best discovered through experience with that instrument.
Beside above, can you change the nut width on a guitar? Can you change the nut width of your guitar? Yes, every nut width has its specific size, which helps you in place of finger space. You change the nut width; there might be a chance that there will be no space for your fingers to operate. And you might end up ruining your instrument.
One may also ask, can your fingers be too big to play guitar?
There are a lot of different places you can press down on the “tip” of your finger. … Eventually you will will develop a muscle memory in your hand, and your fingers will go right to the correct place without thinking about it. So your fingers are not too fat to play guitar. You can do it, just keep practicing.
Does guitar nut width matter?
It’s commonly thought that nut width is important with regard to your approach to the guitar e.g. do you play mostly with a pick or play fingerstyle. But for the most part nut width is less important than string spacing as nut width mostly affects the fretting hand and not the picking hand.
How do I choose a guitar nut?
How do you measure nut width on a guitar?
How wide are Fender nuts?
1-11/16″ (43mm) – Modern Medium
This is the standard nut width. It is our most popular nut width size, and the closest to modern Fender® necks.
How wide should the neck of a guitar be?
Standard neck width is usually either 43mm (1 11/16″) or 44mm (1.73”, more often referred to as 1 ¾”). Nylon-string classical guitar necks are typically much wider at anywhere between 47mm and 51mm (2″), as are many gypsy jazz guitars (which incidentally are steel strung).
What electric guitar has the widest nut width?
Full Table
| Guitars | Width at Nut | Scale Length |
|---|---|---|
| Gibson Les Paul Standard | 1.695″ | 24.75″ |
| Gibson SG Standard | 1.695″ | 24.75″ |
| PRS SE Standard | 1.6875 | 25 |
| Fender American Ultra Stratocaster | 1.685 | 25.5 |
What guitar has the widest nut?
Which guitar has the widest nut? The Cordoba C10 and C12 are both at 2.04″ nut width, which is the widest we’ve ever seen. However, it’s likely there are other six-string classical guitars out there with a a similar measurement, perhaps even slightly wider.
What guitar has the widest string spacing?
8 Electric Guitars With Wider String Spacing
| Model | String Spacing | Nut Width |
|---|---|---|
| Ibanez Genesis Collection RG550 | 2.125” = 54mm | 1.692” = 43mm |
| Yamaha PAC611VFM | 2.125” = 54mm | 1.61” = 41mm |
| Yamaha Pacifica 612VIIX | 2.125” = 54mm | 1.61” = 41mm |
| PRS SE Custom 24 | 2.07” = 52.5mm | 1.69” = 43mm |
What is Gibson nut width?
Nut width decreases to 1 9/16″ (39.7 mm) in ’65 and continues until the end of the decade. Neck profile decreases to a thin profile in mid 1960. Gradually increases (on average) until 1965. 1965-onward profile is a standard c shape.
What is the best nut width for guitar?
What is the most common nut width for guitars?
- 43 millimeters or 1 11/16 inches. The most common nut width is best known thanks to the electric guitar and especially the world-famous Stratocaster from Fender. …
- 49 millimeters or 1 15/16 inches.
What is the neck width of a classical guitar?
Four fingers are used to pluck the strings, with the thumb acting as a support. As for the width of the neck, a typical Yamaha classical guitar has a neck width of 52 mm, while that of a Yamaha acoustic guitar is 43 mm, demonstrating that the classical guitar neck is about 1 cm wider.
What is the nut width of a Stratocaster?
What is this? The neck width at the nut of a typical Strat is 1.650 inches (42mm).
What is the nut width on a Les Paul?
The nut width is 2 1/8″ – check out how wide the neck is. Here are a few things to remember: Nut width and string spacing are not always synonymous. Nut width is the biggest factor in string spacing, but some guitars with the same nut size have different spacing at the bridge, creating a different feel.
What is the Standard Stratocaster nut width?
Probably our most common nut width. 1.65″ (41.91mm) This size is popular with most vintage 50’s and 60’s Fender necks.
What is the width of a Fender Stratocaster?
The neck width impacts how easily you can stretch your hand out over the fretboard. The neck width at the nut of a typical Les Paul is 1.695 inches (43mm). What is this? The neck width at the nut of a typical Strat is 1.650 inches (42mm).
What nut width should I choose?
Which acoustic guitar has the widest nut width?
List of 13 Wide Neck Acoustic Guitars
| Model | Nut Width | Check Price |
|---|---|---|
| Gibson Acoustic 1939 J-55 | 1.77″ (44.95mm) | Sweetwater |
| Ibanez ACFS300CE Artwood | 1.77” (45mm) | Sweetwater |
| Martin 000-28 | 1.75” (44.45mm) | Sweetwater |
| Martin D-28 | 1.75” (44.45mm) | Sweetwater |
Why are classical guitar necks so wide?
Acoustic guitars and electric guitars use steel strings, whereas classical guitars use nylon strings. … The neck of the guitar is wider than usual, to allow the player’s fingers to press down a string without coming into contact with other strings during fast musical pieces.
Why are electric guitar necks so narrow?
Because you don’t need to pick an electric guitar hard to get a good, loud sound, guitar makers experimented with thinner, narrower necks, lower action, and lighter strings.