The slots should be only deep enough so 1/3 of the string is above the top of the nut and 2/3 in the nut.
Also to know is, does guitar nut affect tone?
First and foremost, it’s important to know that the material of the nut only influences the tone of the open strings directly. … Indirectly, the nut also influences the overall tone of a guitar because the nut transfers the vibrations of the strings to the neck, so the material and density are crucial.
Keeping this in consideration, how do I know if my nut slot is too high? The feeler gauge should be placed on top of the first fret, sliding underneath each string. If there is extra space, then the slot is cut too high and will need to come down until the string lightly touches the top of the gauge.
Simply so, how do I make my nut slot deeper?
How do you fix a nut slot that is too low?
How do you raise the nut on a guitar?
How do you smooth a nut on a guitar?
How do you stop nut buzz on guitar?
How high should locking nuts be?
There should be a gap of about . 010 – . 020” between the fret and the bottom of the string. You can measure this with a set of feeler gauges if you want, but usually, I eyeball it.
How high should nut be above fretboard?
The top of the nut is shaped to follow the radius of the fretboard, and the string slots also follow this curve. To allow the strings to clear the top of the first fret, the bottoms of the slots should be . 030″ higher than the fret height.
Should the guitar nut be glued?
Is it necessary to glue a guitar nut in place? Gluing the nut is not completely necessary, the pressure of the strings and the friction between the nut and neck will hold it in place. However, you can use a few drops of white wood glue to fix it in place to prevent it falling off when changing strings.