The fret height can be anywhere from a short . 032″ to a tall . 060″. The width of the barbs and depth of the tang also vary from .
Moreover, does fret size affect tone?
But while players can argue about the sound of various fretwire, the effect that frets have is far more about feel and durability than it is about tone. New, freshly dressed, and worn frets each affect the feel and the ability of a guitar or bass to intonate, and that will in turn affect the tone.
Similarly, how deep should a fret slot be? The standard is 0.5 mm for regular frets and 0.63 mm for replacement frets. You can use a carpenter’s square to guide your fret saw (use the straight side of your fretboard).
Beside above, how do you measure fret size?
The Length of a fret is determined by it’s position on the fretboard. Since most/all necks get wider as you work your way up the frets, the 1st fret is considerably shorter than the 20th fret. For example a typical Tele will have 1.650″ nut width while the Butt Width (the width of the neck after the last fret) is 2.2″.
How high are jumbo frets?
How tall are medium frets?
What fret size should I get?
Short frets like the 6230, 6150, and 6130 are good for people who really like to feel to fingerboard when they play chords. What is this? Whereas, jumbo or medium-jumbo frets feel smoother, provide extra sustain, and can let you bend without exerting as much force.
What fret wire is best?
What kind of fret wire do you prefer? Personally, I like stainless steel for its durability and resistance to tarnishing… but I prefer the feel of nickel silver for string bends (less slippery). And I love the way EVO Gold fret wire complements guitars that feature gold hardware!
What size are vintage tall frets?
Standard Nickel/Silver Fret Wire
| Size Number | Width X Height | Description |
|---|---|---|
| 6105 | .094″ X .054″ | Narrow Tall. Used on a number of signature models, and a good choice when vintage frets feel too small. |
| 6100 | .110″ X .055″ | “Super Jumbo”. This stuff is really huge. |
What size frets did SRV use?
The guitar featured frets that measured 0.110″ wide by 0.055″ when new, similar to Dunlop 6100 fretwire. String height was measured to be 5/64″ on the high E string and 7/64″ on the low E string. Each string had three full winds for the best angle at the bone nut.
Why are tall frets so narrow?
Ease of bending is also enhanced by taller frets, whether wide or narrow. Narrow frets shouldn’t be too hard to bend on, unless they are badly worn down, and they also leave a little more finger room on the fretboard – particularly in the higher positions – which might suit some players better.