How to inspect an existing object using a radius gauge
- Step 1 – Select radius gauge set. …
- Step 2 – Decide radius type. …
- Step 3 – Select blade. …
- Step 4 – Light object. …
- Step 5 – Light object (contd) …
- Step 6 – Check blade radius. …
- Step 7 – Match blade to object surface. …
- Step 8 – If necessary, adjust surface.
Thereof, how do you find the radius of a fretboard?
The radius should be listed in the Tech Specs section. If you look closely at the neck of your guitar, you’ll notice a slight arch between the high and low E strings. Manufacturers refer to this arch as the radius.
Likewise, how do you make a jig fretboard radius?
Also to know is, how do you make a radius gauge?
How do you radius a fretboard by hand?
How do you read a radius gauge?
How do you set a string radius?
How do you set the radius on a saddle?
How do you use a digital radius gauge?
How to use a digital radius gauge
- Step 1 – Set up gauge. Turn on and set up the digital radius gauge. …
- Step 2 – Select application. Consider your application. …
- Step 3 – Position gauge. …
- Step 4 – Read measurement.
How do you use a guitar feeler gauge?
How do you use a string gauge?
What fretboard radius is the best?
A rounder radius of 9.5 to 10 inches is popular for open position chords. A flatter radius of 12 to 16 inches is popular for guitar soloing and bending notes. A compound radius offers both, starting rounder in open position and flattening out as you move higher up the neck.
What is fretboard radius?
The fingerboard radius is the measure of the arc of the fingerboard across its width. You don’t have to look too closely at most electric guitar and bass fingerboards to see that few if any of them are truly flat; most of them have a slight convex curvature across their width.