A good measurement is about 1/16″ in from each end of the first fret (measuring from the top of the beveled fret ends). Put the two outside E strings on the guitar and, looking straight down on the top of the nut, move these strings together or apart until their spacing is correct for you.
Subsequently, how deep should guitar nut slots be?
The slots should be only deep enough so 1/3 of the string is above the top of the nut and 2/3 in the nut.
Moreover, how do I know if my guitar action is too high? There are several telltale signs that a guitar is in need of a set-up. If the intonation is off, the action is too high, the guitar buzzes when you fret a note, strings stop vibrating and buzz as you bend them, frets feel sharp, or neck appears warped, then your guitar definitely needs a set-up.
Hereof, how do I know if my nut is too high?
To check nut-slot height, hold the string down at the third fret, and see how much it moves over the first fret. This is similar to checking neck relief, but the string should move much less. If the string doesn’t move at all, chances are the slot is too low.
How do you adjust the height of a nut?
How do you adjust the string height on a Stratocaster?
How high should Pickups be?
Start by setting all of your guitar pickups to 3/32” (0.093”, 2.38mm) on the bass side and 2/32” (1/16”, 0.0625”, 1.98mm) on the treble side. Remember, this is the space between the top of the pole piece and the bottom of the string, held down at the last fret.
How high should strings be off first fret?
String Height at the 1st Fret
| Low Action | “Normal” Action |
|---|---|
| Low E: 0.51mm (0.020”) High E: 0.30mm (0.012”) | Low E: 0.76mm (0.030”) High E: 0.41mm (0.016”) |
How high should the action be on an electric guitar?
How high should the nut be on a Les Paul?
Action at the 12th
“Once you’ve checked the nut height at the 1st fret, it’s time to check the action at the 12th fret,” Jim says. “On electrics, our official spec is 3/64ths of an inch.
How Should guitar strings sit in the nut?
Nut Slots: Depth
Big deep slots and a quarter-inch of nut above the strings just looks a bit rubbish. Ideally, your wound strings should have about half to two-thirds of their diameter in their slots and the unwound strings should sit just below the surface.
Should guitar strings be the same height?
Most guitarists who play purely, or mostly, bottleneck keep their strings much higher than is comfortable for standard playing, and that height makes slide work a breeze. If your style blends slide and standard fretting on the same guitar, experiment to find a happy medium.
What should the action be at the nut?
Measuring the nut slot heights
As a starting point, shoot for . 02” in between the top of the first fret and the bottom of the string at the first fret on the wound strings (low E, A and D), and . 018” for the plain strings (high G, B, and E). On acoustic guitars with a wound G, you will also shoot for .