If your multi-effects pedal offers some type of amp modeling, it will likely have a headphones output. What is this? Even if it doesn’t have something labeled ‘Headphones’, look for an option to connect the pedal to a mixer. This is often labeled as line out.
Hereof, can headphone jack be used as audio out?
there is ZERO chance of using a headphone OUTPUT as an INPUT. generally all inputs can not be used as outputs and all outputs can not be used as inputs. the only exceptions are hdmi (arc) and on some soundcards which are wired to allow for port swapping.
Then, can I use attenuator with a combo amp? COMBO AMP: When using an attenuator with a combo amp, place the unit between the amp’s speaker out and the speaker itself. Most combo amps have internal speakers that can be unplugged from the amp chassis using a 1/4″ phone plug.
Simply so, can you record from headphone out on amp?
Yes, you can use a headphone out into a line in. Just keep in mind that a headphone output power is stronger than line level power. You will not hurt the headphone amp at all because it’s made to drive a much lower resistance, anything higher than 30 ohms is completely safe.
Do attenuators damage amps?
Electrically speaking, it would make no real sense for an attenuator to damage an amplifier considering these devices come after the amp in the signal chain. Problems do arise when players implement attenuators, but more often than not it is a result of having the amp pushed to its limits for hours at a time.
Does attenuation affect tone?
Tone changes
In an ideal world, attenuators would allow you to use any amp at any volume level without any adverse effect on sound quality or reliability. In practice, the use of attenuation does change tone, but blaming the attenuator isn’t always justified.
How do I record directly from my amp?
How do I record from my phone to my guitar amp?
For an android phone: Plug a 3mm male to male cord in the headphone out on the amp. Plug the other end of the male to male 3mm into the headphone side of a 3mm audio splitter. Open the recording software that comes with your phone. Plug in the male jack from the splitter (need a 3 ring male) into the phone.
How do you get a good tone at low volume?
Is a headphone output line level?
Line level signals are much hotter than microphone level. Aside from the output of a mic preamp, other examples of line level signals are the headphone output of your phone, the aux input on your car stereo, or the output of an audio mixer.
What is the difference between headphone and line out?
Line Out (or Line Output) is an audio port that is used to send line-level audio signals from one audio device to another. On the other hand, Headphone Out is an audio port that delivers an amplified line-level signal meant to drive headphones.
Why would you need an attenuator?
Fixed attenuators in circuits are used to lower voltage, dissipate power, and to improve impedance matching. In measuring signals, attenuator pads or adapters are used to lower the amplitude of the signal a known amount to enable measurements, or to protect the measuring device from signal levels that might damage it.