What is a good neck thickness?

Most adult male neck sizes range between

Neck Size Measurement Chart
Size Inches CM
S 15½ 39.5
M 16 41.5
L 17 43.5

>> Click to read more <<

Regarding this, are wide neck guitars easier to play?

Guitars with wider necks are generally harder to play. Especially if you have really short fingers. On the other hand, too narrow necks can also make some guitar players struggle. The bottom line is that neck width plays a big role in an overall playability of a guitar.

Also, can a guitar neck Be Too Thin?

Beside this, does fretboard thickness matter?

Fingerboard thickness is a significant contributor to the overall geometry – if bridge/saddle height and neck angle stay the same, then a thicker fingerboard will result in lower action and easier playability.

How thick is a fender fretboard?

For a Fender-style neck, the neck-shaft is typically 3/4″ (~19mm) thick. The fretboard is usually radiused so it’s thinner on the outside edges, but at its thickest point it’s 1/4″ (~6.4mm) thick.

How thick is a Stratocaster neck?

Re: Need American Standard Strat Neck Thickness

1st fret: 20,5mm, or 0,807″. 12th fret: 21,7mm, or 0,854″.

How thick is a Telecaster fretboard?

0.86 in.
1st Fret Thickness 0.86 in.
Fingerboard Radius 12 in.
Fret Marker Black Dot
Fret Type and Count 6150 Medium – 22 frets
Heel Type Standard Telecaster

How thick is the average guitar neck?

Acoustic guitars typically have a nut width between 41mm (1.61”) on the small side and 51mm (2″) on the wide side. The most common widths for steel-string acoustic guitars are typically somewhere in the middle. Standard neck width is usually either 43mm (1 11/16″) or 44mm (1.73”, more often referred to as 1 ¾”).

How thick should a guitar fingerboard be?

Thin: any neck with a 17-19mm thickness at the nut. Medium: any neck with a 20-22mm thickness at the nut. Thick: any neck with a 23mm+ thickness at the nut.

Is a thick guitar neck better?

Thin necks are generally for fast playing, like on ibanez’s and other guitars. Thicker necks are generally made for slower playing, like blues or some rhythm playing etc.

Is a thinner guitar neck easier to play?

Thinner neck guitars can be easier to play for some guitarists, which is based on their preferred playing style, hands’ size, subjective feel, and experience. So, some players will find the thin guitar necks easier for playing and practicing, while others will say the thick ones are the best ones.

What is considered a thick guitar neck?

The depth, or thickness of your guitar’s neck, is the distance from front to back. For example, classic Fenders from the 1950s (such as the Strat) tend to be 0.870 inches thick at the first fret and 0.980 inches at the 12th fret. In the 1960s, these measurements decreased slightly to 0.820 inches and 0.960 inches.

What is considered a thin neck guitar?

The best thing you can look for are smaller necks with a profile closer to the 60s than the 50s or 70s. For example, in terms of Fender, you should always look at 60s reissues or modern guitars to get the thinner necks. It’s the same with Gibson.

Where is a guitar neck measured from?

How is guitar neck length (scale length) measured? The best way to measure guitar scale length is to measure the distance between it’s nut and the center of the 12th fret.

Leave a Comment