The order of your pedals matter
The order in which the pedals are set up matter because the signal is being processed multiple times if you have multiple pedals. A general rule of thumb is to first set your distortion and drive pedals first, followed by your modulation pedals like echo, chorus, flanger, tremolo, etc.
Additionally, how do I set up an effects loop?
Furthermore, how do you line up guitar pedals?
In this regard, should chorus go before or after delay?
Chorus is a modulation effect, and as such, it should be placed fairly late in your pedal chain. It should come after a wah pedal, compression pedal, overdrive pedal, and distortion pedal, but before your delay pedal, tremolo pedal, or reverb pedal.
Should delay come before reverb?
In a guitar signal chain, the delay unit is generally placed before a reverb pedal, but it’s up to the individual musician to decide on the order. Putting delay before reverb can muddy up the sound, so most guitarists prefer placing it after the delay.
Should distortion be in effects loop?
To summarize, we would not recommend putting a distortion pedal in your effects loop. Instead, put it in the main line between your amp’s input and your electric guitar. It’ll help the distortion pedal interact better with your preamp and will sound more natural when moving from a clean to a distorted sound.
What comes first overdrive or distortion?
Generally, your distortion, overdrive and fuzz effects pedals should go towards the start of your pedal chain as they have the greatest effect on the tone. Fuzz pedals should usually go first, followed by overdrive and finally distortion.
Where do I put my multi effects pedal in my chain?
Typically, most players will find that compression, boost, and dirt pedals are best suited to being first in the signal chain, or perhaps second, right after a wah or tuner (both pedals that may be easily replaced by a multi-effect, by the way). This is a good place to start, as it produces very dependable results.
Where does a flanger go in the chain?
Where does a flanger go in your signal chain? As with most modulation effects, flanger will sit most comfortably towards the back end of your pedal chain. You’ll be best off putting it after everything except ambient effects like reverb and delay.
Where does booster pedal go in chain?
A second very popular way to use a boost pedal, is to put it in front of an overdrive pedal in your signal chain. In this position in your signal chain, engaging your boost pedal will not increase your volume at all. Instead, it will increase the gain and compression in your overdrive pedal.
Where does delay go in effects chain?
Delays and reverbs
The end of the signal chain is where the delay/echo and reverb effects should be placed – preferably with the delay in front of reverb – primarily because both are “ambience” effects that give the illusion of a sonic space or atmosphere.
Where does the EQ go in a pedal chain?
EQ or equalizer is recommended in front of distortion or gain based effects if you want to drive and color the sound. EQ after distortion will give you volume changes which allow you to switch to a louder lead sound which you cannot do if the EQ is before distortion.
Where should Noise Gate go in pedal chain?
Naturally, you’ll want to place the noise gate wherever the noise is, for example after your fuzz pedal. It’s most common, however, to put it at the end of your chain but before any ambient pedals such as delay and reverb.