The Wenge is a very common wood to make electric bass and guitar necks, but it is also used to make fingerboards to replace other more expensive woods such as Rosewood and Ebony.
In this regard, are wenge necks heavy?
Wenge is considered a very hard wood and a little heavier than maple. I can attest my Wenge neck is a tad heftier than the roasted maple one I also have in awaiting project funding. If you’ve played on Wenge you already know how it feels.
Correspondingly, does neck wood affect tone? The neck wood affects the tone of a guitar by impacting the way that the vibrations produced by the strings behave. Denser neck woods, like maple sound brighter and have less sustain. Mahogany on the other hand, produces a warmer and darker tone with better resonance and sustain.
Then, how do you finish a wenge neck?
Ihave and still use Tru-oil on wenge and it works very well . Like it has been said you don’t NEED to put a finish on it . If I was not going to put a finish on it I would still sand it to a shine (600 grit ) and wax it with minwax paste wax . It can be reapplied as needed and over time it fills the deep open pours .
How much does Wenge cost?
$26.99 /Board Feet
| 1-99 | $26.99 /Bd. Ft. |
|---|---|
| 100+ | $20.24 /Bd. Ft. (25% off) |
Is wenge a good fretboard?
I had a Warwick bass that had a wenge neck and fingerboard, and I have to say it was one of the slickest necks I have ever played. Even when you get sweaty under stage lights, it stays smooth. As far as tone goes, it adds a nice midrange “bark” to a bass; so I would imagine it would add the same quality to a guitar.
What are most guitar necks made out of?
Many guitar necks are made from two pieces of wood. Some guitarists prefer a guitar neck and fretboard to have two separate strands of wood. This can affect the tone and strength of the guitar neck as well as making the manufacturing process easier. The Glueing process provides a tight bond between the connecting wood.
What is pau ferro fingerboard?
A great wood for instrument fingerboards, pau ferro is a South American tonewood with a smooth feel and sonic characteristics similar to rosewood, but lighter in color and harder.
What is the best wood for guitar neck?
Mahogany is the most common wood used for building necks for acoustic guitars. It is strong, dense but light and easy to carve.
What kind of wood does fender use?
When you’re looking over the specs of a Fender electric guitar or bass, one of the first things you’ll see listed is the kind of wood the body is made of. And with few exceptions, two mainstay woods have been used throughout Fender history for fashioning electric instrument bodies — alder and ash.