Considering this, can I sand my guitar?
You can use a fine grain of sandpaper of to smooth out the wood on the guitar. You’re going to want to work over the entire body of the guitar with a medium grit sandpaper (120 grit) and go back over again with the entire body and use an even finer grit of paper (220 grit).
One may also ask, how do I make my guitar neck faster? What you could do is rub with a scotch brite pad (green). That’ll satinize the finish and make the neck feel a lot smoother. Fine steel wool (0000) is also an option, but be sure to cover up your pickups when using that. ^ What he said or wet sanding with 2000 grit sandpaper works well too.
Hereof, how do I make my guitar neck smooth?
To remove this glossy buildup, rub the back of the neck with 0000 steel wool. This will leave the neck feeling smooth without that sticky sensation. Remember, only use 0000 steel wool. If you use more aggressive steel wool (000 or 00) you’ll run the risk of rubbing through the protective satin finish.
How do you finish a guitar neck with TRU oil?
How do you relic a guitar neck?
How do you relic a guitar with sandpaper?
How do you sand a maple neck?
How do you sand an acoustic guitar neck?
How do you sand down your neck?
To get started, cup your hand around the neck with the sandpaper so you have contact with the entire surface area. The first few strokes will cut into the finish and you can see if you need to apply or release pressure in any spots. Also, make sure you run the sandpaper the full length of the neck.
Should you clear coat guitar neck?
I like to finish headstocks in either a tinted gloss (Fender® style guitars) or solid color e.g. black (Gibson® style guitars) followed by a clear coat as this not only looks great but helps protect the headstock. Whenever we play the guitar our hands are constantly coming into contact with the neck.