Weight: 48.5 lbs.
Also, does Vox AC10 have master volume?
In common with the Marshall 18W and the Watkins Dominator, the AC10 had an EZ81 rectifier, two cathode biased EL84 power valves, plus a `vibrato’ (tremolo) channel. … The tremolo is omitted but you get reverb instead. The originals were non-master volume amps, but the C1 has gain and master volume controls.
Additionally, does Vox AC10 have reverb? More portable than the AC15 and more powerful than the AC4, the AC10C1 features the classic Top Boost tone circuit that provides an array of classic and modern tones. Now equipped with reverb and a master volume, the AC10C1 is the perfect companion for the home, studio or stage.
Moreover, how many watts is an AC10?
At 10-watts, the AC10 has plenty of volume and nails all the ringing clean jangle and chunky overdrive that Vox is famous for. THE BOTTOM LINE: The compact VOX AC10 packs all the legendary Top Boost character of the flagship AC30 and is cleverly voiced for more headroom, versatility and chime.
Is an AC15 a good amp?
This amp sounds really good at very low volumes. Unfortunately, living in a townhouse with close neighbours, it is impossible hard push hrf this amp. Believe me, I’m even for the pure clean sound it is loud. For those looking for a bedroom pracice amp, I do not recommend the AC15.
Is the Vox AV15 a tube amp?
The Vox AV15 is a hybrid tube/analog modeling amp with a 12AX7 tube in the preamp stage.
What is an AC30 amp?
The Vox AC30 is one of the classic tube guitar amplifiers that shaped the sound of popular music. Introduced in 1958 by Vox, the original AC30 amp featured 30 watts of Class A power into a 12-inch Goodman 60-watt speaker.
What speakers are in Vox AC10C1?
Vox AC10C1-VS Limited Edition Celestion Speaker Features:
EL84 power tubes; 12AX7 preamp tubes. 10″ Celestion Junior V-Type Speaker for enhanced clarity and detail. Simple but effective Gain, Bass, Treble, Reverb, and Master Volume controls.
What tubes are in a Vox AC10?
Vox AC10 Tube Set consists of 2 x 12AX7 preamp tubes and 2 x EL84 power tubes. The AC10 was one of the first amplifiers to bear the VOX name and has long been adored for his ability to achieve rich, articulate tube tone at very manageable volumes.
Why are tube amps heavy?
The principle reasons tube-type electronics were heavy are: The mechanical parts were laid out on a steel box called a chassis (pronounced chass-y). A typical amplifier occupies about 1.5 square foot and weighs 4 to 5 lbs for 16 or 14 gauge steel. The tubes are made of glass and metal.