Our stainless steel, with its greater hardness and tighter grain structure has much higher wear resistance for greater fret life. … Individual frets cut to size, straight cut or cut and notched tangs, are available upon request. Minimum order quantity for pre-cut frets is 2000 pieces.
Consequently, do stainless steel frets affect tone?
Stainless steel frets have nearly no impact on tone and are tough as nails. Every instrument should come with them standard these days. SS frets play like butter — super smooth and glassy feeling.
Also question is, how deep should fret slots be?
Secondly, how does fret size affect playability?
Big frets = bigger tone, smaller frets equal more precise intonation. Ah, if it were just that easy; if there were only TWO fret sizes … big ones for those who want maximum tone, especially on single-string big bend solos, and small ones for those who want precise intonation.
How tall are Gibson frets?
106″ Wide x . 036″ Tall) 6130s are better known as ‘medium jumbo’ fret wires. This size is often used by Gibson on their more modern guitars.
How wide should a fret slot be?
Best Fret Wire in the World.
Most fret profiles have a standard 0.020″ tang width. For installation, it is typically recommended that it is installed into a 0.023″ fret slot.
What are jumbo frets?
A jumbo fret is made with a thicker gauge wire, and consequently the top of the fret is further away from the fretboard. The claimed playing advantages are: you can get your fretting-hand fingers further down in the gap to the side of the string, allowing you to put sideward pressure on the string more easily.
What are the different fret sizes?
Different fret sizes
- 6230 – Vintage frets. The smallest fret wire that you are likely to encounter is 6230 fret wire. …
- 6105 – Modern narrow and tall. Compared with vintage instruments, most modern guitars have frets that are both wider and taller. …
- 6150 – Vintage jumbo. …
- 6100 – Jumbo. …
- 6130 – Medium Jumbo.
What fret size is easiest to play?
If you are a beginner, or strictly a rhythm player, small to medium frets will do you great – easy chording and sliding from one barre chord to the next without feeling like your going over speed bumps. But if you are a lead player doing lots of bending and vibrato, the jumbo frets are the only way to go!
What fret wire does Taylor use?
What size is medium fret wire?
Medium Frets (usually between . 080″ and . 095″)—This medium-sized wire is the sweet spot, in my opinion, giving a comfortable feel and enough mass for nice sustain and even some decent string bending at the larger end of this medium fret width category.
Why are 6105 frets so popular?
The 6105 is a tall fret (almost as tall as the 6000 size) but quite a bit narrower in width. These are great for getting the added pluses of string bendability and a thicker, meatier sound too. Guitarists that do a lot of bending, such as blues and fusion players, should definitely check out these bigger options.
Why are tall frets so narrow?
Ease of bending is also enhanced by taller frets, whether wide or narrow. Narrow frets shouldn’t be too hard to bend on, unless they are badly worn down, and they also leave a little more finger room on the fretboard – particularly in the higher positions – which might suit some players better.