The Hosco Groobar is a the perfect aid to help you cut nut slots. Simply choose your thickness, slide against the nut, and file away until you see marks in the groobar. That’s when you know you’ve reached your desired depth. Never file your nut slot too deep again!
Simply so, are brass guitar nuts good?
Bone or Brass nuts for guitar will offer a great balance of durability and tone as the harder material will transfer sound from the string to the neck through the nut slot more easily than less dense materials. Plastic and softer material can have the opposite affect and dampen the sound.
Also question is, can a guitar nut cause buzz? A poorly cut and set-up top nut can cause bad intonation, string buzz and affect the playability of the first few frets of your guitar.
Similarly, can you replace a guitar nut?
Different materials will influence a guitar’s tone, and a poorly fit nut will greatly affect playability. For one reason or another (worn slots, a change in string gauge, complete breakage, a need for different string spacing), a nut will occasionally need to be replaced, and many guitarists can do this themselves.
Does a guitar nut need to be glued?
Is it necessary to glue a guitar nut in place? Gluing the nut is not completely necessary, the pressure of the strings and the friction between the nut and neck will hold it in place. However, you can use a few drops of white wood glue to fix it in place to prevent it falling off when changing strings.
How do I fix my nut slot?
How do you fix a deep nut slot?
There are several ways to repair this issue. You can use dust or baking soda with glue, but I’ve found that a Q-Tip works very well too. You simply tape off the ends of the nut and then remove a small portion of the cloth and roll it up, then insert it into the slot that is too low.
How do you fix a nut slot on a guitar?
How do you shape a guitar nut?
Making a Nut, Step-by-Step
- Clean the nut slot. Scrape out old glue residue, and make the slot square and clean without removing wood. …
- Choose your nut material. …
- Roughly shape the nut. …
- Lay out the spacing. …
- Cut starter slots. …
- Remove the nut to protect the guitar. …
- Final slot height. …
- Mark the final size.
How wide should guitar nut slots be?
In making an ideal nut you will want the actual width of the nut slot to match the width of the string exactly. A string whose width is . 017”, or seventeen thousandths of an inch, wants to sit in a slot that is exactly seventeen thousandths of an inch.