| Manufacturer/Brand | Model | Fretboard Radius |
|---|---|---|
| Lowden | Most | 16″ |
| Luna | Most | 12″ |
| Martin | Acoustic | 16″ |
| Maton | Acoustic | 12″ |
Keeping this in view, are wide neck guitars easier to play?
Guitars with wider necks are generally harder to play. Especially if you have really short fingers. On the other hand, too narrow necks can also make some guitar players struggle. The bottom line is that neck width plays a big role in an overall playability of a guitar.
Consequently, how do you measure a fretboard radius? How to measure the fretboard radius
- Find the guitar radius gauge that matches the arc (or radius) of your neck. …
- Use a ruler graduated in 32nds or 64ths of an inch to measure the height of the top and bottom E strings. …
- Set the gauge on top of the strings next to the bridge.
Moreover, what are jumbo frets?
6100 – Jumbo
Like vintage jumbo frets, jumbo frets are also wider than the frets on most guitars. However in contrast to vintage jumbo frets, jumbo frets are also tall. They have a width of . 110″ and a height of . 055″.
What fret size is best?
Short frets like the 6230, 6150, and 6130 are good for people who really like to feel to fingerboard when they play chords. What is this? Whereas, jumbo or medium-jumbo frets feel smoother, provide extra sustain, and can let you bend without exerting as much force.
What fretboard radius is the best?
A rounder radius of 9.5 to 10 inches is popular for open position chords. A flatter radius of 12 to 16 inches is popular for guitar soloing and bending notes. A compound radius offers both, starting rounder in open position and flattening out as you move higher up the neck.
What guitar neck is best for small hands?
What is a 7.25 radius neck?
The next most common fingerboard radius, 7.25” (184mm), is a vintage-era spec now used on just under a third of Fender electric instruments. The 7.25” fingerboard radius originated in the early 1950s, and was used for most Fender electric instruments until the 1980s.
What is the most common fretboard radius?
What is the radius of a Les Paul neck?
When did Fender switch to 9.5 radius?
Most prevalent is the modern 9.5 radius (241mm), which was adopted in the 1980s and is now found on about two thirds of Fender electric instruments. The next most common fingerboard radius, 7.25 (184mm), is a vintage-era spec now used on just under a third of Fender electric instruments.
Which guitar neck is best?
The oval c-shape guitar neck is a comfortable shape for all playing styles unless you have large hands. In fact, the c-shape is the most common type of guitar neck shape. It’s nearly flat and highly comfortable to play. Modern guitars like Fender Stratocasters have a flat oval c-shape.