To measure the fretboard radius of your guitar, you’ll need a tool called a radius gauge. A guitar radius gauge is used to compare the string’s height with respect to the fretboard radius. To optimize your guitar’s playability, it is recommended that the string heights match the fretboard’s radius.
In respect to this, how do you calibrate a radius gauge?
Detailed Procedure
- Select appropriate radius chart and mount on optical comparator.
- Mount the IUT on the worktable of comparator and align with the best-fit radius.
- Repeat step 2 for each concave and convex radius on IUT. If IUT is one in a set of similar instruments, each IUT must be checked.
Regarding this, how do you make a 9.5 radius?
Likewise, how do you make a guitar radius gauge?
It is possible to make your own radius gauge for a guitar fret board. You simply mark on a piece of paper the desired inch radius and draw an arc using a large compass or a piece of string with a central pivot point.
How do you measure a filet?
How do you measure a fretboard radius?
How Do You Measure It? As for the radius itself, in mathematics, the ‘radius’ is the distance from the center to the circumference (or edge) of a circle. In this case, the fretboard is placed at the top of the circle and the arc from one edge to the other is the size of the radius.
How do you measure the radius of a Fender neck?
How do you read a radius?
Just remember to divide the diameter by two to get the radius. If you were asked to find the radius instead of the diameter, you would simply divide 7 feet by 2 because the radius is one-half the measure of the diameter. The radius of the circle is 3.5 feet.
How do you set the radius of a bridge?
How do you use a guitar string radius gauge?
How do you use a radius gauge set?
How high should the action be on a Stratocaster?
ACTION
| Neck Radius | String Height Bass Side | Treble Side |
|---|---|---|
| 7.25″ 9.5″ to 12″ 15″ to 17″ | 5/64″ (2 mm) 4/64″ (1.6 mm) 4/64″ (1.6 mm) | 4/64″ (1.6 mm) 4/64″ (1.6 mm) 3/64″ (1.2 mm) |
What is the fretboard radius on a Les Paul?
But the new Standard also features a compound neck radius, and whereas the Les Paul Standard Traditional sports a 12″ radius from nut to the 22nd fret, the new Standard boasts a 10″ radius at the nut that flattens to 16″ at the other end of the fretboard.
What is the radius bridge for a compound neck?
On most guitars, the fingerboard has a radius and, most of the time, this radius is consistent along the length of the neck. This means, if the radius is 10” at the nut, it’s also 10” at the last fret. And, for the purposes of setting up, you would generally set the bridge saddles so the strings follow this 10” radius.