Also, how deep should fret slots be cut?
Regarding this, how do you count bass frets?
Also question is, how do you make a fret for a slotting jig?
How do you make a fret slot box Miter?
How do you use a fret ruler?
How high should the action be at the 12th fret?
For electric guitars, in our opinion, a good default string height at the 12th fret is typically about 6/64th of an inch (2.38mm) on the bass side and 4/64th of an inch (1.59mm) on the treble side.
How is bass action measured?
Step One: Measuring the action
With your ruler, measure the distance from the top of the 12th fret to the bottom of your lowest string. We typically use small increments in order to be as accurate as possible. A ruler that’s graduated in 64ths of an inch is a great tool to keep in your gig bag or case.
How many frets does a Precision bass have?
How thick is a fret saw?
Cut accurate 90-degree slots when you use the saw with our Fret Slotting Miter Box.
| Overall length | 15-1/4″ | (387.35mm) |
|---|---|---|
| Blade depth | 1-3/4″ | (44.45mm) |
How wide should fret slots be?
Best Fret Wire in the World.
Most fret profiles have a standard 0.020″ tang width. For installation, it is typically recommended that it is installed into a 0.023″ fret slot.
Is a 20 fret bass good?
Bass purists state loudly that no electric bass guitar needs more than 20 frets on it – especially since if you play up high on the fretboard, you’re not playing bass notes anymore. Bass modernists will take as many frets as you can throw at them.
Is the action too high on my guitar?
There are several telltale signs that a guitar is in need of a set-up. If the intonation is off, the action is too high, the guitar buzzes when you fret a note, strings stop vibrating and buzz as you bend them, frets feel sharp, or neck appears warped, then your guitar definitely needs a set-up.
What basses have 24 frets?
But yeah, most Ibanez, Warwick, Schecter and Spectors are 24 fret. If you like the crunchy sound of a P-Bass, look into Ibanez SRX series.