16 mm (5/8″) – Pocket Depth.
Subsequently, how thick are bass fretboards?
Jonsbasses. I usually start with a fingerboard thickness of 7mm / 1/4″.
Consequently, how thick is a rosewood fretboard? The rosewood fingerboard thickness was then progressively reduced to 3mm. Maple was then definitively reintroduced in 1970 as a separate piece of wood.
Moreover, how thick is a Stratocaster neck?
Most everyone makes neck pockets that are 5/8″ or . 625″ deep except Fender. They have made them in various depths and current Strats are not . 625″ deep.
How thick is electric guitar?
Common body thickness is somewhere around 45 mm. From all the guitar-making materials I’ve seen on the internet, it seems that people usually make cavities very space-unwise.
How thick is the average guitar neck?
Acoustic guitars typically have a nut width between 41mm (1.61”) on the small side and 51mm (2″) on the wide side. The most common widths for steel-string acoustic guitars are typically somewhere in the middle. Standard neck width is usually either 43mm (1 11/16″) or 44mm (1.73”, more often referred to as 1 ¾”).
How thick should a fret board be?
Most modern Martin fretboards are around 1/4″ in the center. The old Martins are usually no more than 0.225″.
How thick should a guitar neck be?
The depth, or thickness of your guitar’s neck, is the distance from front to back. For example, classic Fenders from the 1950s (such as the Strat) tend to be 0.870 inches thick at the first fret and 0.980 inches at the 12th fret. In the 1960s, these measurements decreased slightly to 0.820 inches and 0.960 inches.
Is rosewood or maple better fretboard?
Compared to maple the difference is notable, as rosewood will soften the sound, even for guitars with maple necks. This is one of the reasons some guitar players prefer Fender Stratocasters and Telecasters with the option of a rosewood fretboard. … Some players find maple too harsh and prefer the warmth of rosewood.